EWM Picomig 225 puls TKG, Руководство по эксплуатации

Страница: 42 / 46

Technical data
Picomig 225
42 099-005682-EW501
7.9.2022
8 Technical data
Performance specifications and guarantee only in connection with original spare and replacement
parts!
8.1 Picomig 225
MIG/MAG TIG MMA
Welding current (I
2
) 5 A to 220 A 5 A to 230 A 5 A to 180 A
Welding voltage according to stan-
dard (U
2
)
14,3 V to 25 V 10,2 V to 19,2 V 20,2 V to 27,2 V
Duty cycle DC at 40° C [1] 220 A (30 %)
170 A (60 %)
150 A (100 %)
230 A (35 %)
200 A (60 %)
170 A (100 %)
180 A (35 %)
150 A (60 %)
130 A (100 %)
Open circuit voltage (U
0
) 70 V
Mains voltage (Tolerance) 1 x 230 V (-40 % to +15 %)
Frequency 50/60 Hz
mains fuse
[2]
1 x 16 A
Mains connection cable H07RN-F3G2,5
Connected load (S
1
) 6,5 kVA 5,2 kVA 5,8 kVA
Generator rating (Rec.) 8,8 kVA
Power consumption P
i
15 W
Cos φ / efficiency 0,99 / 86 %
Protection class / Overvoltage
category
Ⅰ
/
Ⅲ
Contamination level 3
Insulation class / protection
classification
H / IP 23
Residual current circuit breaker Type B (recommended)
Noise level [3] <70 dB(A)
Ambient temperature [4] -25 °C to +40 °C
Machine cooling / Torch cooling Fan (AF) / gas
Wire feed speed 1 m/min to 18 m/min / 39.37 ipm to 708.66 ipm
Factory-installed roll equipment 0,8/1,0 mm for steel wire
Drive 4 rollers (37 mm)
Wire spool diameter Standardised wire spools up to 300 mm
Welding torch connection Euro torch connector
Workpiece lead (min.) 35 mm 2
EMC class A
Test mark / / /
Standards used See declaration of conformity (appliance documents)
Dimensions (l x b x h) 636 x 298 x 482 mm
25.0 x 11.7 x 19.0 inch
Weight 24 kg
52.9 lb.
[1] Load cycle: 10 min. (60 % DC
≙
6 min. welding, 4 min. pause)
[2] Safety fuses are recommended DIAZED xxA gG. When using automatic cutouts, the "C" trigger chara-
cteristic must be used.
[3]
Noise level during idle mode and operation under standard load according to IEC 60974
‑
1 at the maxi-
mum operating point.
[4]
Ambient temperature dependent on coolant! Observe coolant temperature range!