Design and function
TIG welding
26
099-002057-EW501
04.03.2019
Display
Setting/selection
Pulse welding (average value pulses)
------- Function switched on
------- Function switched off (ex works)
Pulse frequency
More parameters can be set in the Expert menu
> see 5.2.7 chapter
.
5.2.7
Expert menu (MMA)
The Expert menu has adjustable parameters stored that don’t require regular setting. The number of
parameters shown may be limited, e.g. if a function is deactivated.
ENTER
EXIT
Figure 5-13
Display
Setting/selection
Arcforce correction
• Increase value > harder arc
• Decrease value > softer arc
Pulse balance
Pulse current
> see 5.2.6 chapter
Arc length restriction
> see 5.7 chapter
------- Function switched on
------- Function switched off
The setting ranges for the parameter values are summarised in the Parameter overview
section
> see 10.1.3 chapter
.
