Machine control – Operating elements
Overview of control sections
099-0M37XS-EW501
31.8.2022
17
4.1.2 Control section B
Figure 4-3
Item Symbol Description
0
1
Display left / Lock function push-button
Switching the device display between various welding parameters. Signal lamps show
the selected parameter.
--------- Press for 3 s to put the machine into lock function
> see 4.2.4 chapter
.
2
Wire feed speed unit signal light
m/min --- Parameter value is displayed in meters per minute.
ipm ------- Parameter value is displayed in inches per minute.
Switching between metric or imperial system via special parameters
"P29"
> see 5.8 chapter
.
3
Welding current signal light
Display of the welding current in amperes.
4
Signal light, Wire speed
Lights when the wire speed is shown on the display.
5
Lock function signal light
Use display left / lock function push-button to switch on and off.
