Design and function
MMA welding or gouging
099-005592-EW501
16.07.2018
25
5.3
MMA welding or gouging
For connection descripti
on, see the relevant “Power source” operating instructions.
5.3.1
Welding task selection
For selection of the welding task and for general operation see the relevant Control operating instructions.
5.4
Remote control
The manufacturer's warranty becomes void if non-genuine parts are used!
• Only use system components and options (power sources, welding torches, electrode
holders, remote controls, spare parts and replacement parts, etc.) from our range of products!
• Only insert and lock accessory components into the relevant connection socket when the
machine is switched off.
Remote controls are used for the remote operation of various machine functions (see operating
instructions for remote control). Depending on the machine design, the remote control connection can be
7- or 19-pole (connection see chapter Machine description
> see 4 chapter
).
Figure 5-16
Item Symbol
Description
0
1
Remote control
• Insert the remote control connector plug into the wire feeder remote control connection (19-pole) and
lock by turning to the right.
