2.1 Connecting the EW3752
1.
Make sure the computer is turned off and the cables are disconnected from the
computer.
2.
Using a Philips screwdriver you can remove the screws at the back of the casing
in order to open the casing.
3.
Look for a free PCI slot (White slot on the main board).
4.
Place the sound card right above the PCI slot. Make sure the connections of the
sound card align with the connections of the PCI slot.
5.
Now gently press the sound card
into the PCI slot. You can feel the card ‘click’
into the PCI slot.
6.
Now fix the sound card into the casing by tighten a screw. Some casing do have
a plastic clamp instead of using screws to fix a PCI card to the casing.
7.
Close the casing en tighten the screws at the back of the casing.
8.
Connect the cables and start the computer.
2.2 Installing the drivers (Windows)
Attention: When using Windows Vista and Windows 7: If your computer is up-to-date,
the sound card may be installed automatically. If installed automatically, you can still
install the software.
During the installation permission will be asked. Grant permission to install the drivers.
Hint: If the CD-Rom does not start automatically, you can also start the wizard
manually:
1.
Click
‘Start’
2.
Click
‘Run’
3.
Type
: ’x:\wizard.exe’ where ‘x’ is the drive letter of your CD-ROM or DVD-station
4.
Press the ‘Enter’ key
1.
After the computer has been started, the ‘Wizard new hardware’ appears.
2.
Click ‘cancel’.
3.
Insert the CD-ROM into the CR-ROM or DVD-player of your computer. The CD-
ROM starts automatically.
4.
Select your language.
5.
Click ‘Next’.
6.
Choose your operating system and click ‘Next’.
7.
Follow the instructions shown on screen to install the drivers.
8.
Restart the computer to finish the software installation.
Содержание EW3752
Страница 1: ...EW3752 PCI sound card 7 1 ...
