10
o
After the lamp is wiped clean or a new lamp is being inserted, then place the
lamp into the lamp holder, adjust the length of the cable into the mounting
groove carefully replace the UV lamp and secure the lamp cover with a screw.
6. Cleaning the machine
Ensure the power cable is unplugged before any routine maintenance, repair or
cleaning of the unit.
Regularly empty the dust chamber and clean the filter to avoid the vacuum cleaner
failing.
Do not use in or near water. The unit is not suitable for cleaning with oil or gasoline.
Use only a soft cloth or neutral detergent to wipe clean the outside of the unit. Coil
the power cord neatly for storage.
Keep it in a dry place
Do not place heavy objects on top of the machine
7. Cleaning and replacing the Exit Filter
Turn off the machine and unplug the power cable
Remove the filter by pulling the tab
Clean off the dust either with clean dry brush or the filter is suitable for hand
washing in warm water but must be completely dry before re-installing.
Lamp holder
Contact pin
