Ewbank AQUAROVER 140, Инструкция по эксплуатации

Страница: 14 / 28

14
PRODUC
T A
SSEMBL
Y
Fig.4
Fig.5
4. Connect the high-pressure hose to the water outlet
• Connect the other end of the high-pressure hose
to the water outlet on the pressure washer and
twist the black rotatable end-piece as indicated
to secure the connection (Fig.4)
5. Connect the garden hose to the water inlet
• Connect the garden hose adaptor (female
coupler) to the water inlet of the pressure
washer, then thread your garden hose (male
end) into the garden hose adaptor (Fig.5)
APPLIANCE START UP
1. Park the appliance on an even surface
2. Insert the mains plug into the socket
Water supply
For connection values, see type plate.
ATTENTION
Impurities in the water can damage the high-pressure
pump and the accessories.
Connect to
water supply
Garden hose
3. Attach garden hose to water supply
CAUTION
o Do not connect to potable water system
o The water supply must not exceed 0.7MPa
o The washer must only be used with clean water, use of unfiltered water containing
corrosive chemicals will damage the pressure washer
4. Bleed the device as follows prior to operation:
i) Turn on the appliance “OFF/ON”
ii) Unlock the lever of the high-pressure gun
iii) Push the lever of the high-pressure gun, the device will switch on
iv) Let the device run (max. 2 minutes) until the water exits the high-pressure gun without
bubbles
v) Release the lever of the high-pressure gun
vi) Lock the lever of the high-pressure gun