13
Ewbank, 38 Bluestem Road, Ipswich, Suffolk, IP3 9RR Tel. 01473 271 272
CAUTION
Ensure that the appliance is fully and correctly assembled before use.
PRODUC
T A
SSEMBL
Y
1. Hose reel handle (Fig.1)
• Take the hose reel handle out of the box and
place in the small hole on the top of the hose reel
• Line up with the straight edges and then push in
until you hear a “click“, which indicates that the
handle is installed securely in place
After unpacking the high pressure washer, lay out all of the parts and accessories. Familiarise
yourself with the parts in the box by comparing them to those listed on APPLIANCE OVERVIEW on
page 12.
NOTE:
some parts may or may not be already assembled.
Installing the washable transparent inlet filter
Take the washable transparent inlet filter from
packaging and screw to front of the main unit
above the “ON/OFF” switch
Fig.2
2. Telescopic handle (Fig.2)
NOTE:
you may have to unreel a small amount of
hose to fit into place
• To fit the telescopic handle place into the top
of the unit and push down to lock into place
• To secure firmly, twist and tighten the nut
Fig.1
