Please do not use it for other purposes except electric car charging.
Do not try to disassemble the device by yourself under any
circumstances. Otherwise, the internal precision parts may be
damaged, and you will not be able to apply after-sales service.
▲Before powering on the device, please confirm that the device
is properly grounded to avoid unnecessary accidents. If a ground
fault occurs, it is assumed that the cable carries voltage. Please
make sure there is no high-voltage power in the system before
inspecting the device.
▲Please keep the power cord away from the heated surface.
Please do not put the power cord in the gap of the closed door
or pull it out of sharp edges or corners.
▲The circuit to which the charger is to be connected must
be equipped with a residual current circuit breaker.
▲Please insulate the unnecessarily exposed metal parts of all
tools to prevent them from touching the metal frame, which may
cause short circuit.
▲To ensure the service life and stable operation of the charging
station, the operating environment should be kept as clean as
possible with a relatively stable temperature and humidity. The
charging station must not be used in flammable environment or
environments with volatile gas.
NOTE
▲
Do not use the charger when the inside of the charging plug is wet.
▲Do not modify, retrofit, or change any part by yourself under
any circumstances.
▲Please do not use this product as a toy. Please take good care
of children to ensure that they will not play with this device as
a toy nor put fingers into the charging connector when the power
plug is still connected.
!
EN
