EVS SYNAPSE CDV07, Руководство по установке и настройке

Страница: 11 / 20

EVS Broadcast Equipment SA
9
4 The CDV07 Card
Introduction
The EVS CDV07 is distribution amplifiers providing a low loss
electronically balanced input with loop through or terminate
connector. If necessary the input can be used truly floating.
Back planes
The CDV07 can be used with a BPL01 or BPL07 back plane. If the
BPL01 is used then the CDV07 has eight outputs. If the BPL07 is
used then the CDV07 has seven outputs and one loop. By means of
this BPL07 the input can be used floating.
Miscellaneous
The CDV07 cards fit into the EVS SFR18 rack.
LEDs at the front of the board indicate the presence of power and
input signal.
The CDV07 can be controlled by EVS Synapse set-up software.
Refer to menu structure for control.
TRI-LEVEL SYNC
The CDV07 is designed for carrying TRI-level references for HD
installations.
Wordclock
The CDV07 can be used with a wordclock input, but the signal
detection will not work.