INSTALLATION AND CONFIGURATION MANUAL
AAD08
10
5 Settings Menu
Introduction
The settings menu displays the current state of each setting within
the AAD08 and enables the item to be changed or adjusted.
Settings can be changed using the front panel of the Synapse
frame (SFR18 or SFR04) or Synapse Setup software.
Please refer to chapter 3 for information on the Synapse front
panel control and Synapse Setup software.
Gain-CH_1
The settings menu item
Gain-CH_1
controls the output gain of
channel 1, the left channel.
Gain-CH_1
has and adjustment
range between
–95.5dB
and
+31.5dB (in 0.5 dB
steps)
. When
Gain-CH_1
is set to
0dB
the output level is
equal to the input level. The default setting of
Gain-CH_1
is
0dB
.
Gain-CH_2
The settings menu item
Gain-CH_2
controls the output gain of
channel 2, the right channel.
Gain-CH_2
has and adjustment
range between
–95.5dB
and
+31.5dB (in 0.5 dB
steps)
. When
Gain-CH_2
is set to
0dB
the output level is
equal to the input level. The default setting of
Gain-CH_2
is
0dB
.
Peak-CH_1
Peak-CH_1
adjusts the threshold of the peak detection circuitry
used to trigger Status and Event conditions (see later). The
adjustment range of
Peak-CH_1
is between
0dBu
and
+24dBu
. The default setting of
Peak-CH_1
is 24
dBu
.
Peak-CH_2
Peak-CH_2
adjusts the threshold of the peak detection circuitry
used to trigger Status and Event conditions (see later). The
adjustment range of
Peak-CH_2
is between
0dBu
and
+24dBu
. The default setting of
Peak-CH_2
is 24
dBu
.
Silence-CH_1
The setting
Silence-CH_1
sets the level of the silence
detection circuitry used to trigger Status and Event conditions
(see later). The adjustment range of
Silence-CH_1
is between
–27.5dBu
and
–50dBu
. The default setting of
Silence-
CH_1
is
-30dBu
.
