Company Registration Number: 9121263
VAT number: 196484653
www.evpeurope.com / +44 (0) 1926 419441 / [email protected]
EVP Ltd, Unit 4, Benford Court, Lower Cape, Warwick, CV34 5DA
4
5
1)
Remove Rugged Keyboard from the packaging. Havis recommends using
our Keyboard Mount (Part # C-KBM-201 - sold separately). These two products
are designed to interlock together and give the user docking, adjustment, and
quick release abilities. However, the Rugged Keyboard can be mounted to any
appropriate surface that has VESA 75 or AMPS mounting hole pattern.
2)
If not using the Havis Keyboard Mount, determine if your mounting location
is equipped with VESA 75 or AMPS mounting pattern. Install the Rugged
Keyboard to your mounting device using (4) M4 x 0.7mm screws (not included).
NOTE: Length of screw is dependant upon your specific mounting application.
Torque screws to 20 in-lbs (2.3Nm) ± 10%.
3)
Insert the USB connector into a compatible USB port on the computer or
docking station in your vehicle.
4)
Turn the computer on. Computer will detect and install drivers once the
keyboard initiates. Drivers are standard plug and play.
Installation
Parts Included
Rugged Keyboard
(89 Keys - US layout)
Mounting Holes
(bottom of Keyboard)
89 Keys
(US key layout)
Emergency Button
Backlight ON/OFF Button
Multi-Touch Mouse Pad
USB connector
(with water resistant cap)
VESA 75 mounting pattern
AMPS mounting pattern
Company Registration Number: 9121263
VAT number: 196484653
www.evpeurope.com / +44 (0) 1926 419441 / [email protected]
EVP Ltd, Unit 4, Benford Court, Lower Cape, Warwick, CV34 5DA
4
5
1)
Remove Rugged Keyboard from the packaging. Havis recommends using
our Keyboard Mount (Part # C-KBM-201 - sold separately). These two products
are designed to interlock together and give the user docking, adjustment, and
quick release abilities. However, the Rugged Keyboard can be mounted to any
appropriate surface that has VESA 75 or AMPS mounting hole pattern.
2)
If not using the Havis Keyboard Mount, determine if your mounting location
is equipped with VESA 75 or AMPS mounting pattern. Install the Rugged
Keyboard to your mounting device using (4) M4 x 0.7mm screws (not included).
NOTE: Length of screw is dependant upon your specific mounting application.
Torque screws to 20 in-lbs (2.3Nm) ± 10%.
3)
Insert the USB connector into a compatible USB port on the computer or
docking station in your vehicle.
4)
Turn the computer on. Computer will detect and install drivers once the
keyboard initiates. Drivers are standard plug and play.
Installation
Parts Included
Rugged Keyboard
(89 Keys - US layout)
Mounting Holes
(bottom of Keyboard)
89 Keys
(US key layout)
Emergency Button
Backlight ON/OFF Button
Multi-Touch Mouse Pad
USB connector
(with water resistant cap)
VESA 75 mounting pattern
AMPS mounting pattern
