8
Use of a cord suitable for outdoor use reduces the risk of electric shock.
Personal safety
Use safety equipment. Always wear eye and ear protection. Using safety equipment such as
a dust mask, non-skid safety shoes, whenever it is needed
Avoid accidental starts. Ensure the switch is in the off position before inserting the plug.
Carrying power tools with your finger on the switch or plugging in power tools when the
switch is in the on position makes accidents more likely.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
gloves away from the power tool. Loose clothes, jewellery or long hair can become
entangled in the moving parts.
Service
Your power tool should be serviced by a qualified specialist using only standard spare parts. This
will ensure that it meets the required safety standards.
Specific safety instructions for reciprocating saw
Before use, check if the blade is in good condition and well fixed.
Before use, inspect the product. In case of any damages observed, stop using the product.
For repairing the product, please contact an authorized service point.
When starting using the product, make sure that the blade is not in contact with any surface.
The cutting operation must start only when the blade is running.
While using the product, use both hands to handle it. Don
’t use the product handling it with a
single hand.
After the cutting operation ends, wait for the blade to stop completely before letting off the
product.
Use only compatible blades.
The product is double insulated. This means it has two completely independent types of
insulation that prevents the operator to enter into direct contact with the metal parts of the
cables. This measure is a high degree of protection against electrocution.
Application
The products is intended to use of cutting metallic and wood parts.
DO NOT USE THE PRODUCT FOR ANY OTHER OPERATIONS FOR WHICH IT IS
NOT DESIGNED.
DO NOT TRY TO ADAPT ANY NON COMPATIBLE ACCESSORIES.
IT IS NOT DESIGNED FOR PROFFESIONAL USE.
Operation
WARNING! IN case of any abnormal noise, immediately turn off the tool and
contact an authorized service facility for repairs
Before pushing the on / off switch, check that the blade installed.
Switching on/off
For switching the product on, press the switch (4). For switching it off, release the switch (4).
In order to lock on the switch, press the lock on button (3) at the same time with the switch (4). For
