9
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
Personal safety
Use safety equipment. Always wear eye and ear protection. Using safety equipment such as
a dust mask, non-skid safety shoes, whenever it is needed
Avoid accidental starts. Ensure the switch is in the off position before inserting the plug.
Carrying power tools with your finger on the switch or plugging in power tools when the
switch is in the on position makes accidents more likely.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
gloves away from the power tool. Loose clothes, jewellery or long hair can become
entangled in the moving parts.
Service
Your power tool should be serviced by a qualified specialist using only standard spare parts. This
will ensure that it meets the required safety standards.
Specific safety instructions for electric tiller
Before each use, inspect the product. The screw must be tightened, the protection covers and
the accesories must be well fixed.
While working, handle the product using the both hands on handles. Never handle the product
using a single hand. Make sure that the grip is proper. Losing the control of tools may cause
damages to user, people around or objects around.
While working, the user must maintain a proper balance. Check the working surface before
use in order to eliminate all the foreign objects and any other objects that could obstruct the
tool. Always wear protection shoes.
While working, keep the product at a safe distance of feet. Do not get them
close to moving blades. Disregarding these instructions coudl cause serious damages.
Always wear protection shoes.
While working, the blades could throw objects (soil parts, stones, other objects)
which could harm the user, the people around or the objects around. Always wear
protection shoes, long trousers, eye and ear protection. Make sure that all the persons
around are at a safe distance of working area.
In the case that the working area is not flat, use the tools with caution due to the risk of losing
control. Do not use the tools if the slope is too high.
Wear protection equipment: protection shoes, long trousers, eye and ear protection.
Always keep a safe distance from any persons while working.
After stopping the product, wait for the blades to stop completely before any other action.
WARNING! Do not use the product in rain conditions. There is high risk
of electric shock.
The product is double insulated. The product is equipped with 2 independent systems of
insulation in order to prevent the user being in contact with parts which could cause an electric
shock.
