9
Carrying power tools with your finger on the switch or plugging in power tools when the
switch is in the on position makes accidents more likely.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
gloves away from the power tool. Loose clothes, jewellery or long hair can become
entangled in the moving parts.
Service
Your power tool should be serviced by a qualified specialist using only standard spare parts. This
will ensure that it meets the required safety standards.
Specific safety instructions for drywall sander
Harmfull/noxious gases may be generated when e.g lead-containing paint is
processed.Therefore use the powertool only in combination with a dust extraction unit and
suitable protective equipment
Beware of kickback: Kickback is the result of improper operation of the equipment. To
minimize the effect of kickback follow the rules:
o
Hold the power tool firmly with both hands and keep your body in a position which
allow to react adequately in case of kickback.
o
Keep your hands away from a moving parts
o
Sharp edges and corner areas must be processed with special care
This power tool is double insulated. This means it has two completely independent types of
insulation that prevents the operator to come into direct contact with the electric cables. This
measure is a high degree of protection against electric shock.
Application
This equipment is intended for personal use for dry sanding walls and ceilings.
Advantages:
The operation is run with almost complete evacuation of dust.
High efficiency and high quality execution for large surfaces
IT IS NOT DESIGNED FOR PROFFESIONAL USE.
Operation
WARNING! IN case of any abnormal noise, immediately turn off the tool and
contact an authorized service facility for repairs
Before pushing the on / off switch, check that the grinding disc is properly
installed .
Installing/replacing sandpaper (fig 1)
The grain size of sandpaper is specified on its rear side.The smaller the number, the coarser the
graining.Use sandpaper with coarse grain for rough grinding and fine grain for finishing.
Apply the sandpaper to the grinding plate (1) using velcro strip mechanism.
Dust extraction
Insert the suction hose adapter into the socket (10)
Connect suction hose to provided dust bag
Suction power can be adjusted by the obturator (11)
– (
fig 2)
LED flashlight
This product is equipped with a flashlight to illuminate the working area (4) . Spot direction could
be adjusted and is driven by on / off switch
Switching ON and OFF
Connect the tool to the power supply.
To start the machine, you squeeze the ON / OFF switch (9). To stop the machine, you release the
ON / OFF switch.
Содержание DWS 710
Страница 2: ...2...
