12
Operation
Switching the product on
Connect the power plug to power supply.
WARNING! Check the power cords before use. Do not use damaged power cords.
WARNING! If it is necessary, use proper extension cords as short as possible and
completely unfolded. Do not connect any other product in the sockets of the
extension cord.
Set the working mode using button (1). There are 4 postions: off, fan, 50% heat, 100% heat.
Set the temperature using the thermostat (2). Rotating it from MIN to MAX, a click should be
heard. This is the signal of thermostat activation.
When the product runs, the LED indicator (6) is on.
When the room temperature reaches the level set on thermostat, only the fan will work. When the
temperature decreases below the level set on thermostat, the heater will start again.
Switching the product off
Before switching off the product, rotate the thermostat (2) to MIN position. A click should be heard.
Set the working mode (1) to fan and let the product run for 2 minutes in order to cool it down.
After 2 minutes, set the working mode (1) to O (Off) and disconnect the power plug.
Cleaning and maintenance
Cleaning
WARNING! Before any adjustments and maintenance, disconnect the power plug
and wait for complete cooling down of product.
•
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
•
Regularly clean the machine housing with a soft cloth, preferably after each use. If the dirt
does not come off use a soft cloth moistened with soapy water avoiding water leakage inside.
•
Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
Maintenance
Our product has been designed to operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends upon proper machine care and regular
cleaning.
Storage
•
Before storing the product, check for cooling down completion.
•
Store the product dry and cool places, without children access, on a solid and stable surface.
•
Protect it from exposure to direct sunlight. Keep it in the dark, if possible.
•
Avoid storing it in places with high variations of temperature.
•
Don
’t keep it in plastic bags to avoid humidity build-up.
