Evoqua DEPOLOX POOL COMPACT WALLACE & TIERNAN Скачать руководство пользователя страница 60 | Manualshive

Страница: 60 / 88

Evoqua DEPOLOX POOL COMPACT WALLACE & TIERNAN Скачать руководство пользователя страница 60

6. Operation

DEPOLOX® Pool Compact

60

EN

6.3.7 ”Information” menu

Various system information, e.g. the installed
software version, is described in this menu.

6.3.8 ”User administration“ menu

The electronics module offers the option of
using up to three user levels. Different rights
are assigned to each user level. The colored
user symbol in the Home screen shows on
what level the user is logged in.

Fig. 2

Home menu

A Actual user adminstration level

No symbol

•

User logged out.

•

Read rights for all settings and change of
operation mode.

User symbol white = Level 1

•

User logged in on Level 1.

•

Read rights for all settings, sensor calibrat-
ion and change of user.

User symbol yellow = Level 2

•

User logged in on Level 2.

•

Read rights for all settings, sensor calibrat-
ion, change of operation mode, change
limit values and setpoints and change
date and time.

User symbol blue = Level 3

•

User logged in on Level 3.

•

Read rights for and write access to all
device settings

Login

1  Call up the Home menu.
2  Press the   symbol.
3  Tap the

Login menu.

4 Enter locking code or password (chapter

Logout

1 Tap the

user symbol. The user is log-

ged out and the user symbol is no longer
displayed.

Create users

In order to create or change the users, log in
on Level 3 is required and access control must
be enabled.

1  Call up the Home menu.
2  Press the   symbol.
3  Tap the

Settings menu.

4 Press the “User administration” parame-

ter.

Reset measurement & control parameters:

Reset system settings:

Reset user administration:

Reset dosing average:

NOTICE

To reset the selected setting to the factory
setting, press the “Execute” button.

NOTICE

The user administration of the web visuali-
zation via Internet browser differs from the
user administration on the display of the
electronics module (chapter 6.3.9).

NOTICE

No symbols are displayed also with disabled
access control; in this case, write access to
all settings is possible.

A

NOTICE

In as-delivered status, access control and
user administration are switched off. We
recommend that you enable access control
after commissioning and create the desired
users.

«
...
58
59
60
61
62
...
»

Содержание DEPOLOX POOL COMPACT WALLACE & TIERNAN

























































































Отзывы:

Нет отзывов