6
Never
use aerosols or steam cleaners near this product.
Never
route the electric cable near the heater outlet.
Never
route the electric cable under carpets or floor coverings.
Never
install this product close to curtains or combustible materials.
Never
Use the heater to dry clothes or other objects.
Never
remove the fireplace surrounding without isolating the electric supply.
Important electrical safety:
This appliance must never be installed above or in front of a fixed electric socket.
The electrical socket must be easily accessible to isolate the supply during maintenance and cleaning.
This appliance is supplied with a two meter power lead, which has a 13Amp moulded three pin plug to connect to a standard
230/240V plug socket.
This appliance must always be earthed. If in any doubt consult a suitably competent person.
Replacement plug: (Please note that it will invalidate your warranty if the moulded plug is removed and
connected to a fused spur by an unqualified person).
This appliance must only be connected to a 230/240 Volts AC 50Hz supply. Before
connecting the fire, check that the supply voltage is the same as stated on the fire.
This appliance must only be used on a AC supply, fuse rating 13Amp.
The wires in the mains lead are coloured in accordance with a standard UK supply, these
being:
GREEN/YELLOW –
EARTH
BLUE –
NEUTRAL
BROWN –
LIVE
As the colours of the mains lead of this appliance may not match the coloured markings used to identify the terminals in a plug,
please observe the following
(Fig:1)
.
•
The green and yellow wire must be connected to the terminal in the plug which is marked with the letter
E
or Earth
symbol.
•
The blue wire must be connected to the terminal in the plug which is marked with the letter
N
.
•
The brown wire must be connected to the terminal in the plug marked with the letter
L
.
•
Replace fuses only with fuses of the correct size and rating.
Fig 1.
