EVOLVEO computer case user manual
Introduction
The computer case is designed as platform for installation of other components
necessary for the operation of a personal computer (PC). It provides a mechanical
protection of the computer components against possible damage. It supplies all
computer components installed, especially a power source, motherboard, graphics
card, optical
DVD
ROM drives, FDD flopy disc drives, HDD and SSD, cooling fans and
water cooling.
Installation
•
Remove the computer case from its packaging.
•
Install the source on the back of the computer cabinet to the designated
location, if you use a modular source, connect the necessary connectors to
the power supply, usually it is:
o
Power cord 20 + 4pin for motherboard
o
Power cord 4 + 4pin for CPU
o
Power cords for HDD/CD ROM, S
-
ATA and IDE
o
VGA cord 6+2pin 530mm
•
Install the motherboard on the prepared brass standoffs.
•
Remove covers from the appropriate drive bays for your optical and floppy
drives and install the drives.
•
Install HDD and SSD drives under the FDD and optical drive bays.
•
Install the external graphics card into the free slot on the motherboard and
screw the graphics card board onto the computer case.
•
Connect all connectors for connection to:
o
motherboard
o
power source
o
HDD, SSD, FDD and CD
-ROM
o
cooling fans
o
water cooling
o
USB, HD Audio
o
main switch
o
LED indicators
•
When connecting cables, follow the instructions supplied with the individual
components.
•
Close the computer case cover.
•
Connect peripheral devices to the PC and then connect the PC to the mains.
