Evolveo Lumos NG, Быстрый старт

Страница: 6 / 8

Dear customer,
thank you for choosing the EVOLVEO Lumos LED lamp of NG series.
1. Remove the lamp from the shipping box and place it on a table or other stable
surface.
2. Connect the power adapter cable to the input "E" on the back of the lamp.
3. Connect the supplied power adapter to the 230 V socket.
4. To adjust the angle of the arm, hold the base and simply swing the flexible arm to the
desired position.
5. To turn the lamp on, touch the switch "B" lightly, each touch of the switch increases
the lamp's brightness by one level until it is completely switched off (circular cycle).
6. Use the switch "A" to turn on the base backlit.
7. Press and hold the button "A" for more than 3 seconds to start the cyclical change of
the backlit colour.
8. To change the base backlit colour to the desired one, touch the colour on the circle
selector "C".
9. If the lamp behaves in a non-standard way, press the RESET button "D" on the back.
10. The "F" LED indicates the power connection.
Caution: The LED lamp may become hot during operation, so let the lamp and the power
supply cool down before handling it again.
TROUBLESHOOTING
Contact EVOLVEO Technical support:
www.evolveo.com/en/support
The warranty DOES NOT APPLY to:

using the device for other purposes than it was designed to

electrical and mechanical damage caused by improper use

damage caused by natural elements such as fire, water, static electricity, power surges
etcetera

damage caused by an unauthorized repair

wear and tear caused by normal use of the product

unreadable serial number