Tools main menu
Information
In "Tools" menu, select "Information", press "OK" button to open
information window.
Press "EXIT" button to exit.
1
2
TOOLS
This menu can display some parameters information in this STB.
Factory Setting
This menu allows you to re-set the STB back to factory settings,
clear all existed channels.
In the "Tools" menu, select "Factory Default", press "OK" button.
You are asked to input a password(the default password is"0000").
1
2
A confirmation window is displayed.
Select "Yes" to return back to factory settings and clear all channels.
Select "No" to cancel back to factory settings.
Press "EXIT" button to exit .
4
1
2
3
Press the "MENU" button to enter main menu.
Press "UP" or " DOWN " button to highlight "Tools", press "RIGHT"
button to enter the Tools menu.
Press "UP" or "DOWN" cursor button to highlight the desired item
and press "OK" button to enter the sub-menu.
Press "EXIT" button to exit.
3
Tools
Information
Factory Setting
Upgrade By USB
Remove USB device safely
Information
x.x.x
xxxxx
xxxxx
x.x.x
x.x.x
xxx
xxxxx
xxxxx
xxx
xxx
Factory Setting
This operation will load default and erase all
the channels that user added, continue?
Yes
No
Remove USB device safely
In "Tools" menu, select "Remove USB device safely",
Press "OK" button to confirm. Then a window is displayed.
Press "OK" button again.
Disk Remove
Remove
OK
USB Disk A-3 GB
Cancel
1
English
10
Software Upgrade
Press "EXIT" button to exit.
Enter "Tools" menu, select "Upgrade by USB", press "OK" button,
Software Upgrade menu is shown.
1
2
Press cursor button to select the desired item, then highlight
"Start" and press "OK" button to start upgrade.
3
We offer the functions for user to upgrade software by USB .
Upgrade by USB
Upgrade Mode
Upgrade File
Start
Allcode
No File
0%