manualshive.com logo in svg

Evolve BAMBOO GTR, Руководство пользователя, Страница: 45 / 48

Поделиться
Скачать
Evolve BAMBOO GTR Скачать руководство пользователя страница 45

/45

If you regularly clean and maintain your electric longboard, it will 

last a long time and ride at its best:

•  Always clean your bearings for best roll and quietest/

smoothest ride. Bearings get dirty and affect ride quality 

which may reduce battery performance and cause possible 

bearing failure.

•  Always check all screws/nuts throughout the skateboard are 

tight (truck nuts, wheel nuts etc). You are responsible for this.

•  Rotate the wheels on the skateboard as you would do so with 

any longboard skateboard, as the drive wheels will wear the 

fastest.

•  Regularly clean & check the belt and drive gear for any 

damage. Replace if necessary.

•  Always store your board at room temperature.
•  Clean your board from dust and dirt so its looks and rides as 

new at all times. Use a damp & dry cloth to clean.

•  Be sure to keep your All Terrain tyres between 30-45 PSI tyre 

pressure when riding.  If the tyres run lower than this PSI then 

your ride times will reduce due to having flat tyres.

MAINTENANCE GUIDE

NOTE -YOU ARE RESPONSIBLE FOR ALL MAINTENANCE RELATING TO THE 
EQUIPMENT, FAILURE OF ANY PART DUE TO LACK OF MAINTENANCE IS NOT 
COVERED BY WARRANTY.

Содержание BAMBOO GTR

















































Отзывы:

Нет отзывов