Temperature Protected: The heating coil reached the maximum allowed temperature during the puff. If
this happens, the DNA 75 will continue to fire, but will not be able to provide the desired wattage.
Ohms Too High: The resistance of the atomizer coil is too high for the current wattage setting. If this
happens, the DNA 75 will continue to fire, but will not be able to provide the desired wattage. The Ohms
Too High message will continue to flash for a few seconds after the end of puff.
Ohms Too Low: The resistance of the atomizer coil is too low for the current wattage setting. If this
happens, the DNA 75 will continue to fire, but will not be able to provide the desired wattage. The Ohms
Too Low message will continue to flash for a few seconds after the end of puff.
Too Hot: The DNA 75 has onboard temperature sensing. It will shut down and display this message if the
internal board temperature becomes excessive.
Auto power down
The screen will be at full brightness while firing. After 10 seconds with no button presses, the screen will
dim. 30 seconds after the last button press, the screen will fade out and the device will go into sleep
mode. To wake the device, press the fire button.
