Evolution RAGE7-S, Оригинальное руководство пользователя

Страница: 11 / 20

11
www.evolutionpowertools.com
EN
DE
OPERATION
1. INSTALLING OR REMOVING A BLADE (Fig. 1)
WARNING: The jigsaw must be disconnected from the power
supply and the blade must not be facing the operator when
installing or removing the blade.
Installation:
• Check that the jigsaw blade is of the correct type.
• Insert the blade into the chuck ensuring that the blade teeth
face forwards.
• Rotate the chuck locking collar forward and slide the jigsaw
blade fully ‘home’ into the chuck. Ensure that the ‘T’ bar of the
bayonet fitting is fully engaged within the chuck. (Fig. 1)
• Release the chuck locking collar.
• Check to ensure the blade is securely gripped by the chuck.
• Check to ensure that the back of the blade has engaged into
the groove in the guide roller. (Fig. 2)
Removal:
Note: A recently used blade can be very hot. Allow such a blade
to cool down before attempting to remove it from the machine.
• Disconnect the machine from the power supply.
• Set the Cutting Action. Selection Switch to position 0.
• Rotate the chuck locking collar forwards.
The blade will automatically eject from the machine.
Note: The blade may eject from the chuck with some force.
Ensure that the ejecting blade will not strike any nearby surface,
bystander or animal. If possible eject a used blade directly into a
scrap recycling bin.
2. ON/OFF TRIGGER SWITCH (Fig. 3a)
This tool is fitted with a variable speed Trigger Switch that
delivers higher speed as the trigger pressure is increased.
EXPLANATION OF Fig. 3a NUMBERS:
1 = TRIGGER SWITCH
2 = LOCKING BUTTON
3 = ROTARY CONTROL
The Trigger Switch is also fitted with a rotary control (Fig 3b)
that allows the operator to select a constant speed and then
lock the trigger in this position.
Fig 1
Close up view of the quick
fit/release chuck with the
blade inserted.
Fig 3 (a)
Close up view of
Trigger
Switch, Locking Button
and Rotary Control.
1
2
3
Fig 2
Close up view of the
correctly fitted blade with
the back of the blade
engaged into the groove in
the guide roller.