Evolution RAGE3-DB, Оригинальное руководство пользователя

Страница: 32 / 116

32
www.evolutionpowertools.com
NOTE: The blade teeth should always point downward at the
front of the saw.
• Install the blade flange, washer and arbor screw.
• Lock the arbor and tighten the arbor screw using moderate
force, but do not overtighten.
• Replace the guard operating arm and its retaining clip. (Fig. 42)
• Ensure the Hex Key is removed and the arbor lock has
released before operating.
• Ensure the blade guard is fully functional before using the
machine.
If required, Blade Bore Reducing Inserts should only be used in
accordance with the manufacturers instructions.
USE OF OPTIONAL EVOLUTION ACCESSORIES
Not supplied as original equipment. All accessories
can be purchased from Evolution Power Tools.
See ‘Additional Accessories’ section.
DUST BAG
A Dust Bag can be fitted to the extraction port at the rear of
the machine. The Dust Bag is for use when cutting wooden
materials only.
• Slide the Dust Bag over the dust extraction port, ensuring
that the spring clip grips the port holding the Dust Bag
securely in place.
(Fig. 43)
NOTE:
For operational efficiency empty the Dust Bag when it
becomes 2/3 full. Dispose of the contents of the Dust Bag in an
environmentally responsible way. It may be necessary to wear a
dust mask when emptying the Dust Bag.
NOTE:
A workshop vacuum extraction machine can be
attached to the dust extraction port if required. Follow the
manufacturers instructions if such a machine is fitted.
WARNING: Do not use the Dust Bag when cutting metallic
materials.
EXTRACTION PORT BLANKING PLUG
(if supplied)
Use the blanking plug in place of the dust bag when cutting
steel based materials.
Fig. 43
Fig. 42