EvoScann® CANDI
©Evolution Measurement Ltd 2021. All rights reserved Doc.No: M-90223 Iss.1 Rev 1
P a g e
|
9
5.
Maintenance
5.1
General Information
EvoScann® CANDI is designed to require no user intervention other than checking electrical
connections are sound for the connected equipment
5.2
Safety Information
Observe all appropriate safety precautions when operating any electrical equipment. Always ensure
wiring is done by competent persons in strict accordance with the electrical connection details in this
document.
Do not use abrasive or solvent substances to clean the unit.
Do not attempt to open the EvoScann® CANDI. The unit is factory sealed and opening the unit will result
in removal of any and all warranty.
5.3
Fault finding
Symptom:
Check likely cause:
Scanner not functioning
Ensure Drivers are fully installed and operational.
Ensure correct wiring connections are made.
Ensure USB is connected to a functional Port
Scanner reading incorrect pressures
Check correct range is selected
Scanner reading intermittently
Check correct version of GUI is being used for P-
Series connected
5.4
Repair & Recalibration
Field repair is not possible with EvoScann® CANDI. All repairs must be carried out by Evolution
Measurement Ltd.
To ensure optimum service and performance, return to Evolution Measurement Ltd.
See contact us page.
