manualshive.com logo in svg

Evolution Aqua eaReefPro 1200S, Инструкция по установке и эксплуатации, Страница: 26 / 28

Поделиться
Скачать
Evolution Aqua eaReefPro 1200S Скачать руководство пользователя страница 26

WARRANTY CARD

WARRANTY CARD

WARRANTY PROVISIONS

REGISTER YOUR 1 YEAR WARRANTY COVER,

COMPLETE THE FORM ON THE REVERSE OF THIS PAGE

OR GO TO www.evolutionaqua.com

AND COMPLETE ONLINE.

WARRANTIES - EVOLUTION AQUA - KELLET CLOSE - WIGAN - LANCASHIRE - WN5 0LP - TEL: 01942 216554

Evolution Aqua warrants your product against defects in materials and workmanship for a period of 
12 months, valid from the date of original purchase and will repair this product free of charge  

(not including shipping costs)

 with new / rebuilt parts.

The guarantee 

DOES NOT APPLY

 in case of improper use, negligence, lack of maintenance or 

accidental damage to the aquarium or cabinet. Damage to the aquarium glass is not included  
in the warranty. Damage to the silicone caused by incorrect cleaning, such as using a sharp object 
to clean the glass, will also invalidate the warranty.

The pre-condition for the warranty is that the stipulated set-up routine is observed.  
In the event that a problem develops with this product during or after the warranty period,  
contact the retailer from whom you originally purchased the item from. The retailer will then liase 
with Evolution Aqua Ltd to organise for the warranty procedure to be undertaken.

The warranty is extended only to the original purchaser. 

Proof of date of purchase will be required

 

before any warranty work can be carried out. 

This warranty only covers failures due to defects in materials or workmanship which occur during 
normal use. It does not cover damage which occurs in shipment or failures which result from 
misuse, abuse, neglect, improper installation, operation, mishandling, misapplication, alteration, 
modification or service by anyone other than an authorised Evolution Aqua dealer.

The cabinet is not waterproof and it is important to ensure that any water that is spilled onto the 
cabinet is wiped off and dried immediately. Failure to do so will invalidate the warranty. Do not 
allow any amount of water to collect on any part of the cabinet. 

Evolution Aqua shall not be liable for incidental or consequential damages resulting from the use 
of this product, or arising out of any breach of this warranty. All express and implied warranties, 
including the warranties of saleability and fitness for particular purpose, are limited to the applicable 
warranty period set forth above.

The installation and use of your product outside of our recommendations as printed in this manual 
may also void the warranty.

These statements do not affect the statutory rights of the consumer.

Содержание eaReefPro 1200S





























Отзывы:

Нет отзывов