IP-BOX 6X15W Manual Ver. 1.00
Page
16
DMX Mode
Each fixture can be individually controlled with a standard DMX-512 controller.
Each device must be “addressed” using the “A001” menu. The address entered is then the base
address, the address from which the device will respond.
If two fixtures are addressed to the same DMX address; they will then behave identically,
responding to the same DMX channels.
This product also embeds wireless DMX technology. It is compatible with the Evolite DWT-512 as well
as Wireless Solution up to G4 protocol. Attention, not compatible with the G5 protocol.
The IP-BOX 6X15W also supports wireless master / slave transmission because the product is equipped
with a wireless transmitter / receiver.
To make a wireless connection.
1/ Turn on the transmitter (not supplied).
/ Turn on the IP-BOX 6X16W(s)
3/ Navigate in the menu and activate 2.4G > CONNECT. Do it on every product.
4/ The receiver will then connect to the transmitter
10 DMX channel
CH1
0-255
Master dimming (0-100%)
CH2
0-255
Stroboscope (Rate 0-100%)
CH3
0-255
Red (0-100%)
CH4
0-255
Green (0-100%)
CH5
0-255
Blue (0-100%)
CH6
0-255
White (0-100%)
CH7
0-255
Amber (0-100%)
CH8
0-9
No function
10-19
Red
20-29
Green
30-39
Blue
40-49
White
50-59
Amber
60-69
Yellow
70-79
Magenta
80-89
Cyan
90-99
Dark orange
100-109
Green yellow
110-119
Salmon
120-129
Turquoise
130-139
Light Green
140-149
Orange
150-159
Straw
160-169
Lavender
170-179
Light blue
