Evolite HYBRID 17R, Руководство пользователя, Страница: 23 / 30

Hybrid 17R Manual Ver. 1.00 Page 23
Information :
DMX monitoring : display the value of the DMX signal that is currently received
Channel: select the channel that needs to be observed
Value : display the DMX value of the selected channel
Lamp using time : show the using time of the lamp
This time(minute ): the using time the lamp has been lit since turn on the machine
Total (hours) : the total time of light lamp lighting since the last light lamp time zero
Error message : display error information (if any one of the menus is wrong, the top right
corner of the menu will show an exclamation mark)
Memory : indicates whether the storage is operating normally. If the memory is not normal,
the menu information cannot be recorded or read, and the lamp time record, and the self
programming data may be lost.
o
Auto Mode
Auto mode is selected in the main menu.
The Hybrid 17R provides 2 Auto modes:
1- Sound Auto Mode: Internal programs will be processed with the music detection ( built-in microphone)
2- Auto Mode: internal program will be processed automatically.
Display description
1 - large font show the current DMX address
2 - Enter the main menu
3 - Set interface language
4 - ON/OFF the lamp
5 -Set the current channel mode, and number showing
represents the current channel number
6 - click flip display screen
7 - display current signal state, click to switch master/slave
mode. The meaning of the display icon is as follows:
Green downward arrow: indicating that receiving the external DMX signal currently
Yellow fork number: no external DMX signal
Blue upward arrow: it’s Master mode, and sending out the signal
8 - Set the current running mode. If the icon is highlighted, which indicates that the mode is running.
9 - error information. If a green tick is displayed, it indicates that the current self-examination is in
good condition. If a yellow exclamation mark, there is a mistake in the self-examination discovery.
Click on the icon to enter the error message menu to see the specific error information.
10 - Show the machine action when the external DMX signal is lost. If the icon is highlighted, which
indicates that the mode is running. This mode is valid only when you turn on the machine. Please
refer to the description of the menu [advanced settings] - [No DMX].
Note : the latest version of the menu, if it is the 4 key mode, when showing the home page, you can press cancel
(or ESC, return) key into the menu.
LED 1 - blue LED , when long time ON represents the master mode; when the extinction indicates no DMX
signal. It can be set "automatic" in the menu [display settings] - [indicator] to let the indicator be OFF along with
the LED backlight.
LED 2 - red LED , when flashing shows sound control mode, when long time ON indicates that have error. It can
be set "automatic" in the menu [display settings] - [indicator] to let the indicator be OFF along with the LED
backlight; but if found error, it will remain ON.
1
LED 2
LED 1