Evolite ArchiTECH 600, Руководство пользователя, Страница: 17 / 25

ArchiTECH 600 Manual Ver. 1.00 Page
17

Set up
o
Control panel
The control board offer several features: you can simple set the starting address, run the pre-
programmed program or make a reset.
 POWER IN/POWER OUT
：
Power input / output
 DMX IN/DMX OUT ： DMX signal input and output interface.

：
Menu button/return button,enter the menu selection interface or previous menu.

：
Confirmation button, used to confirm the selected function.
 ：
Upward
/downward select function or Parameter increment / decrement.
NO. Main menu Primary-menu Sub-menu Note
1
MENU
Dimmer Curve
Linear
Light intensity increases linearly with DMX
value
Exponential
Light intensity can be finely adjusted at lower
DMX values and broadly adjusted at higher
DMX values.
Logarithmic
Light intensity can be broadly adjusted at lower
DMX values and finely adjusted at higher DMX
values.
S-Curve
Light intensity can be finely adjusted at lower
and higher DMX values and broadly adjusted
at medium DMX values.
FAN
Quiet
Fan off, total power output reduced by 20%.
Studio
Low speed, light output 100 %
Live High speed, light output 100 %
AUTO
Temperature control mode, reach 40 °C begin
to work
Factory Set Password
Password is ：
UP+UP+DOWN+DOWN+ENTER
2
ADDR
001~512 DMX address settings
3
DISP
Display orientation settings
4 Dimmer 0~8 Fine dimming settings
5 Mode
DMX-512 DMX-512 console mode
Static
RED 000~255
Static color settings
GREEN 000~255
BLUE 000~255
WHITE 000~255
Strobe 000~255