KC200
KC200B
27
8
Remove the "T" shaped card.
9
Remove the film from the adhesive card (1) and insert the cleaning card into the feeder as shown, adhesive side up (2).
Cleaning starts.
10
Remove the cleaning card.
9
8
Wait for 2 minutes after cleaning before using your printer. Don't forget to readjust the gauge to the desired card thickness.
Please note the "T" shaped card must be used immediately after the bag is opened.
Advanced cleaning can also be launched from the Evolis Print Center by clicking on "Start cleaning."
If the terminal is in a dusty environment, we recommend that you place a protective cover on the printer to limit exposure to dust, whether the printer
is in operational mode or not. For more thorough cleaning, you can also carry out advanced cleaning systematically instead of regular cleaning.
The cleaning frequencies recommended by Evolis may be increased depending on the environment in which the terminal is located.
EPC
NOTE
!
