Evolis EDIKIO FLEX Скачать руководство пользователя страница 40

Страница: 40 / 45

EDIKIO

FLEX

Firmware update (for Windows)

Updating the firmware is a simple operation but one which, if not properly completed, can result in your printer breaking down.

The firmware update is done with the Edikio Print Center.
The update can be done automatically or manually.

Updating the firmware with the automatic update wizard

We recommend using the update verification wizard

. This wizard will first find the available updates for the software suite. Once the software suite

has been updated, run this wizard again to verify the updates of the printer firmware. To launch this wizard, go to

Edikio Print Center

Tools

Update

verification wizard.

An Internet connection is required for the wizard to run.

Updating the firmware manually

If you wish to update your firmware manually, you can run the update wizard for the printer firmware.
Before starting, you should download the firmware update files from the

www.edikio.com

website:

Go to

Help

, then select the Edikio printer model.

Under

Printer drivers

and

Firmware

, click the file for the corresponding Firmware.

Accept the download then save the file in a directory on your hard drive.

Now open the Edikio Print Center and double-click the name of your printer. The

Properties

window opens.

Then go to '

Maintenance

Firmware update

' and click '

Launch the firmware update wizard

.' This wizard will help you in the process

of updating your printer firmware.

When prompted by the program, follow the instructions and select the "

.firm

" file that you have just downloaded to your computer.

This operation can take up to 1 minute. When the firmware is installed on your printer, it will restart. The update is complete and your

equipment is ready for use.

If the printer is not showing the "

Ready

" status, this means that the update was not carried out correctly or that the printer may not

be working properly. Check the connection cables and run a new update.

The update is complete, and your equipment is ready to customize your price tags.

However, if you experience problems while updating the firmware with the Edikio Print Center, please contact your Edikio by Evolis reseller, who can

provide a new file to install the firmware.

Never interrupt the transfer between the computer and printer during the download phase (powering off the printer or computer,

unplugging a cable). This will result in a complete inability to restart the printer. Should such an incident occur, please contact your

Edikio by Evolis reseller, who will need to replace your printer's processing board.

Before any update, please contact your Edikio by Evolis reseller for guidance on the advisability or otherwise of carrying out this

operation. In general, these updates are required only in the event of a problem or malfunction that has been clearly identified by

your Edikio by Evolis reseller.

Содержание EDIKIO FLEX













































Результаты поиска

Содержание EDIKIO FLEX

Отзывы:

Похожие инструкции для EDIKIO FLEX

Бренды по названию

Популярные бренды

Evolis EDIKIO FLEX, Руководство пользователя

Результаты поиска

Содержание EDIKIO FLEX

Отзывы:

Похожие инструкции для EDIKIO FLEX

Бренды по названию

Популярные бренды