STEP 1:
Connect your antenna.
Find the best location to mount your antenna and connect
it to Scout using a coaxial cable.
STEP 2:
Connect to Internet.
Connect Scout to your Internet modem using an ethernet
cable. If you plan to use Wi-Fi, reference the Settings
menu after you have powered up your television.
STEP 3:
Connect to television.
Using a HDMI cable, connect to Scout and any HDMI
port on your television.
STEP 4:
Connect to power.
Connect power supply to Scout using the USB-C cable.
Make sure that your television is set for the proper HDMI
port you selected in step 3.
STEP 5:
Wait for channel scan.
Be sure to select “yes” if you are interested in viewing
local, over-the-air broadcasters like ABC, NBC, CBS
and Fox.
Note:
If Scout is blinking yellow or you do not see a high-quality picture,
please try moving your antenna to a new location.
USB-C PD
HDMI
Ethernet
Coaxial cable
Please visit
evoca.tv/FAQ
or reference your antenna’s instructions with issues or questions.
Still have questions? Please visit
Evoca.tv/SetUp
or call 877-EVOCATV between 9 AM and 6 PM MST.
4
3
1
2
{Back of Scout}
FIVE EASY STEPS
TO CONNECT!
HOW EVOCA
WORKS
Evoca
Next Gen TV Tower
Place your antenna in a location to receive the strongest signal. It may take a few tries to get it right.
Keep in mind the following:
•Point towards our broadcast tower at Bogus Basin located at the mountains to the north of Boise.
•Higher is better.
•A window is sometimes, but not always, better.
Please visit
evoca.tv/FAQ
or reference your antenna’s instructions with issues or questions.
Antenna Set-Up Tips
