Installing the Product
W15 SERIES
· 13 ·
Note: The installation
requirements are as the
following table
Material Square
hole
Mounting
Metal sheet type (minimum
thickness: 1.5mm)
384mm×236mm
Tighten from the rear with the
hook (accessories)
Warning
Make sure the wall or the ceiling or the carrier can bear the load four times as
heavy as the total weight of the PC (including the cabinet rack and additional
expansion modules).
3.2.2 VESA Standard Supporting Arm Installation
Step: Use screws to fasten the
PC onto the supporting arm, as
shown in the left picture.
Note: During the installation,
use the screws that come with
the PC or select screws
according to the user manual.
Warning
The weight bearing capacity of VESA supporting arm should be at least twice the
weight of the PC.
