EVOC MEC-5007 Series, Руководство пользователя

Страница: 73 / 80

Assembly and Maintenance
MEC-5007 SERIES
- 29 -
Item Description Item Description
1 Screw 2
Power protection
3 Power bracket A 4 Power supply
5 Power cable 6 Bolt
7 Power bracket B 8 Chassis body
Removing the power supply:
1. If the bottom cover has not been removed, please remove it by the Step 1 ～ 3 for
removing HDD;
2. Remove the four screws on the power protection cover;
3. Take out the power protection cover;
4. If the chassis cover has not been removed, please remove it by the proper steps;
5. Remove the four screws fixing power bracket A and right-side Aluminum plate;
6. Take out the power module;
7. Pull out the power cable;
8. Remove the one screw on the power bracket B, and take out the power bracket
B;
9. Remove the one bolt and four screws on the power supply;
10. Take out the power supply.
Applicable products: MEC-5007-03** 。
Note: Step 2 ～ 3 can be skipped for removing power supply of
MEC-5007/MEC-5007-02**, and other steps are the same.