Chapter 3 BIOS Setup
EC0-1814(B)
- 37 -
Exit
South Bridge Configuration
Exit Options
Save Changes and Exit
Discard Changes and Exit
Discard Changes
Load Optimal Defaults
Load Failsafe Defaults
Exit system setup after
saving the changes.
←→
Select Screen
↑↓
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
V02.57 (c)Copyright 1985-2004, American Megatrends, Inc.
Save Changes and Exit
When you have finished all the changes and want to cover the original
parameters, you may implement this operation and save the new parameters
into CMOS storage. To implement this operation, you may choose this option
and press < Enter >; press < Enter > again to exit.
Discard Changes and Exit
If you do not want to save the change into CMOS storage, please choose this
option and press < Enter >; press < Enter > again to exit.
Discard Changes
If error occurs in your change and the changes need to be neglected, please
choose this option and press < Enter > in order to enter corresponding options
again and reset it.
Load Optimal Defaults
This menu is used to load default value in system configuration. These
default values are optimized and could give play to the high capability of all
hardware.
Load Failsafe Defaults
The function of this option is to initialize the setup of each option to realize
the most fundamental and secure system functional value. To implement this
function, choose this option and press < Enter >; messages to be confirmed
will be shown on the screen, press < Enter > to implement this function.
