P. 6
P. 7
MAINTAINING YOUR ELECTRIC SCOOTER
• Examine the charger regularly for damage to the cord, plug, enclosure and other parts. If such damage is found, stop using the charger until
it is repaired.
• Ensure that the brake function is functioning properly.
• Ensure that all components are properly secured and are functioning according to the manufacturer’s specifications
• Inspect wheels for excess wear and replace if necessary.
• Please add oil for lubrication (centre of front wheel) periodically and replace bearing when its worn.
• Use a few drops of light machine oil to lubricate wheel bearing (centre of front wheeel). Clean bearing after use.
• Regular maintance enhances the safety of the equipement.
• Scooter should never be ridden by more than one person at a time.
• Never ride at night, check local laws regarding scooter use and obey all traffic and pedestrian regulations, and give right of way to
pedestrians.
• Care should be taken when riding on wet pavements as braking action and wheel traction may be reduced.
• Reserve longer braking distance during wet conditions.
• Never leave your scooter unattended.
• Do not modify the scooter or change the scooter in anyway not outlined in these instructions.
• Self locking nuts and fixings may lose effectiveness over time so please check and tighten periodically.
The Electric Scooter was designed and manufactured with quality materials and craftsmanship.
Make sure the power switch is turned off whenever the scooter is not in use. Never store the product in freezing or below freezing
temperatures! Freezing condition will damage the battery permanently.
Inspect regularly for:
General
Frame, Fork and Handlebars
Wheels
Safety Gear
Battery
TROUBLESHOOTING GUIDE
Scooter
Will Not Run
Fully charge the battery. First charge for 3 hours and up to 2-3 hours
for recharges.
Check to ensure that charger is tightly plugged into both the wall and
the scooter.
Step on the Pedal, kick start until the scooter is moving. The motor will
engage only if the scooter gains momentum.
Make sure to step on the centre of Pedal.
Make sure to step on the centre of Pedal.
Scooter
Run Time
Is Short
Fully charge the battery. First charge should be 3 hours and up to 2-3
hours for recharges. Check to ensure that battery charger is tightly
plugged into both the wall and the scooter.
Make sure power flow to the wall outlet is on. Battery may need to be
replaced. Even with the proper care rechargable batteries do not last
forever. The average rechargeable battery life is 1 to 2 year depending
on scooter conditions and use. Replace only with EVO replacement
batteries.
Scooter
Runs
Sluggishly
Ride only on solid, flat, clean and dry surfaces such as pavement or
flat ground.
Make sure the scooter is not overloaded. The product is designed to
sustain a maximum weight of 50kg. Avoid overloading the scooter as
this will prematurely wear out the batteries and scooter. Do not ride
uphill a steep slope or use the scooter tow any object.
Problem
Possible Cause
Solution
Scooter
Suddenly
Stops
Working
Recharge the battery up to 3 hours.
Check for cracks or broken connections. Although broken frames are rare, it is possible for an aggressive rider to run into a curb or wall and
bend or break a frame. Get into the habit of inspecting your scooter on a regular basis.
Always wear proper protective equipments such as an approved safety helmet, elbow pads and knee pads and sport shoes(not open toed).
Never ride barefooted or in sandals.
Periodically inspect the wheels for excess wear.
• Maximum user weight of 50kg should not be exceeded.
• Read all instructions before using the scooter for the first time..
• Keep instructions for future reference.
• This product must be assembled by an adult.
• Not for use on busy streets, roads or highways.
• Only use this product on smooth, dry and flat surfaces.
• Do not overload the vehicle - only one child at a time.
• Correct assembly of this product is vital, Incorrect assembly can cause
harm to the child. Please check the product before use.
• This product should be used caution since skill is required to avoid
falling or collision causing injury to user or third parties.
The scooter will generate “Beep” sounds if:
1. The scooter is left unattended for around 10 seconds, and it will “Beep” once. Then, it will enter in sleep mode.
2. During the sleep mode, push the scooter or kick start to trigger the motor, it will “Beep” once.
3. After kick start, the scooter is moving and motor engaged, it will “Beep” once.
4. During the scooter is moving, the rider stops the scooter, it will “Beep” once.
5. IF the battery voltage is low (less than 18V), it will “Beep” for 10 seconds continuously. It reminds that it is time for recharging
battery.
HOW TO OPERATE YOUR ELECTRIC SCOOTER
Important: Adult supervision is required.
Not to be used in traffic.
Pedal
Rear foot brake
Place one foot on the pedal of deck and another on the
ground.
Step on the pedal and kick start.
Kick start until the scooter is moving, keep pressing the
pedal by foot.
The motor will engages only if the scooters gains
momentum.
Release the pedal to decelerate or step on rear foot
brake to stop.
Battery is not charged
Wires or connectors
are loose or unplugged
Without
forward momentum
Battery requires charging
Battery will not accept
full charge
Pedal (Power button)
is not stepped on
correctly
Unsuitable riding
conditions
Scooter is overloaded
Battery is very low
Pedal (Power button)
is not stepped on correctly
1437702.ARG / 1437703.ARG V3
Jun. 2021