Rev.1 6 |
P a g e
3.3
Startup procedure
i.
Turn ON DC Isolator/s on right hand side of enclosure:
For
Prime3:
For
Prime1:
ii.
Press Battery restart button in EVO Isolation Box:
iii.
Turn ON AC Grid Breaker in EVO Isolation Box:
iv.
Turn ON AC Load Breaker in EVO Isolation Box:
Caution:
Removal of the Front Door of the Prime Enclosure may expose a user to dangerous and potentially
lethal Electric currents. This should only be done by your installer or suitably qualified Technicians.
4.
Maintenance
The Prime must be regularly maintained for performance and warranty conditions. Refer to each specific maintenance task
to see how regularly each part should be maintained.
If the user does not feel confident in performing the required maintenance tasks, contact your installer to have them
complete the maintenance task on your Prime.
4.1
Filters
There are two intake filters on the Prime which are both located at the bottom of the enclosure.
There are also hot air extraction filters at the back of the prime which help prevent the ingress of vermin, water and dust
into the enclosure.
All these filters need to be regularly maintained to ensure proper airflow in and out of the system.
As another level of protection there is also a vermin proof screen at the base of the system.
BATTERY
RESTART BUTTON
INVERTER 1
DC ISOLATOR
INVERTER 2
DC ISOLATOR
INVERTER 3
DC ISOLATOR
INVERTER
DC ISOLATOR
AC LOADS
BREAKER
AC GRID
BREAKER
