Press the Menu Button
Select option “Connection Test”.
Terminal Will Print a receipt with “Connection OK” printed near the top.
Your terminal is now ready to use.
Once the Base is connected, place the terminal in the charging base and allow the device
to power up. This will take approximately 2 minutes.
The Mobile Network and Signal Strength will be indicated on the top right-hand corner of
the display. The Sim card will attached to the strongest Network by default, depending
on the signal strength in the area.
To confirm your terminal is connected and ready to accept Payments, perform a
connection test using the following steps:
1.
2.
3.
4.
Please consult your Quick reference guide provided for instructions on performing
transactions
Support
EVOPayments.co.uk/support-centre/
Getting started
Connect the Power supply cable to the port shown and if Using Ethernet or PSTN, please
connect the cables to the Ports shown
