background image

WARRANTY

evo

Medical Solutions warrants the Aeroneb

®

Go AC and

Battery Powered Controller to be free from defective 
workmanship and materials for a period of two years from the
date of purchase. The Nebulizer unit shall be warranted for a
period of one year from the date of purchase. Check with your
dealer for more details. This warranty is limited to the original
purchaser of the Aeroneb

®

Go Nebulizer. Any defective part 

or assembly will be repaired or replaced, at the sole discretion
and determination of 

evo

Medical Solutions if the unit has not

been misused or tampered with during the warranty period.
Shipping charges, if any, shall be paid by the purchaser.

NOTE:

There is no other express warranty. Implied warranties, including

those of merchantability and fitness for a particular purpose, are limited
to the duration of the express limited warranty and to the extent
permitted by law and all implied warranties are excluded. This warranty
does not cover providing a loaner nebulizer, compensating for costs
incurred for nebulizer rental, or labor costs incurred in repairing or
replacing defective part(s).

Instruction Manual

Aerogen and Aeroneb are registered
trademarks of Aerogen, Ireland Ltd.

©2009 

evo

Medical Solutions               

P/N 22263 Rev C 

Rx Only

Aerogen (Ireland) Limited,
Galway Business Park,
Dangan,
Galway.
www.aerogen.com

Содержание Aeroneb Go











Отзывы: