1.
Loosen the two factory front evap skid bolts so
that about ¼” thread are showing.
2.
Loosen and remove the rear factory evap skid bolt
completely.
3.
Loosely install the EVO-12058B Evap Skid Rear
Mount Plate using the rear factory evap skid
bolt , the rear mount plate should be installed
so that the plate is sandwiched between the
crossmember and factory evap bracket,
leaving yourself a few threads still showing.
4.
Remove the two factory front evap skid bolts
you previously loosened in step #1. Note the
factory evap skid bracket will now be
supported by the rear bolt only. You are now
ready to install EVO-12057B Evap Main Skid
Plate. Start by placing the front lip of the
factory evap skid under the front edge of the
EVO Evap Main Skid. Once you have done
this the rear of the factory evap skid can be
nestled into the rear of the EVO Evap Main
skid.
