2
1 3 9 3 S o u t h S a n ta F e D r , D e n v e r , C o 8 0 2 2 3
•
1 - 8 8 8 - 8 8 7 - 2 9 8 0
•
i n F o @ e v o - l i t e . C o m
•
w w w . e v o - l i t e . C o m
LT 870
LT 870
Sending end
Receiving end
Receiving end
Relay Point
Frequency
Point A
Frequency
Point B
LT 870
LT 870
6. Wiring Diagram:
2.4G Wireless transmission
DMX512 Console
DMX512 Console
Console signal cable
connected to wireless
DMX emitter
LT-870
LED Strip
LED Strip
LED Strip
LED Strip
LED Strip
LED Strip
LED Strip
Please install the
booster antenna
in high open place,
the communication
distance can up to
1000-2000 meters
generally.
Booster Antenna
Booster Antenna
Booster Antenna
6.1
ne
O
sending end multiple receiving ends:
6.2 Relay way to extend the communication distance:
6.3 Extend the communication distance by boost antenna:
Sending end
DMX512 Console
LT-874-5A
LT-874-5A
LT-874-5A
澬
澭
Attn
LT-874-5A
LT-874-5A
LT-874-5A
LT-874-5A
Receiving end
Receiving end
7. Attention:
7.1 The product shall be installed and serviced by the qualified person.
7.2 This product is non-waterproof. Please avoid the sun and rain. When installed outdoors
please ensure it is mounted in a water proof enclosure.
7.3 Good heat dissipation will prolong the working life of the controller. Please ensure good
ventilation.
7.4 Please check if the output voltage of the LED power supply used comply with the
working voltage of the product.
7.5 Please ensure that adequate sized cable is used from the controller to the LED lights to
carry the current. Please also ensure that the cable is secured tightly in the connector.
7.6 Ensure all wire connections and polarities are correct before applying power to avoid
any damages to the lights.
7.7 If a fault occurs, please return the product to your supplier. Do not attempt to fix this
product by yourself.
8.1 We provide lifelong technical assistance with this product:
A 5-year warranty is given from the date of purchase. The warranty is for free repair
or replacement if cover manufacturing faults only.
For faults beyond the 5-year warranty, we reserve the right to charge for time and
parts.
8.2 Warranty exclusions below:
Any man-made damages caused from improper operation, or connecting to excess
voltage and overloading.
The product appears to have excessive physical damage.
Damage due to natural disasters and force majeure.
Warranty label, fragile label and unique barcode label have been damaged.
The product has been replaced by a brand new product.
8.3 Repair or replacement as provided under this warranty is the exclusive remedy to
the customer. We shall not be liable for any incidental or consequential damages
for breach of any stipulation in this warranty.
8.4 Any amendment or adjustment to this warranty must be approved in writing by our
company only.
ƾ
This manual only applies to this model. We reserves the right to make changes without prior notice.
8. Warranty Agreement:
