EVO Gimbals EVO RAGE3, Руководство пользователя

Страница: 14 / 20

21 22
USING RAGE3 INVERTED DR-E6 CHARGING FOR CANON CAMERAS
Note: The size of the camera and its balance condition when mounted may affect the performance
when inverted. For certain camera models, test inverted and re-position the camera if necassery.
Note: Original Canon DR-E6 DC power
connector is recommended. Please follow
instruction on how to power on or off, otherwise
the camera may fail to start.
Please ensure balanced installation of the
camera when inverted and do not rotate or
shake the handle while transfering to inverted
(as seen in graphic).
The DC 8.0V power outlet on the side of the RAGE3 can be used for charging Canon 5D cameras through a DC
power connector - DR-E6 (purchased separately).
Charging 5D3 / 5D4 camera:
Powering on:
1. Connect the power input end of the connector to the DC
8.0V power outlet, then connect the other end to the
camera.
2. Mount and balance the camera on the RAGE3 gimbal, then
start up the camera.
Powering off:
Power off the camera first, then unplug the connector from
the RAGE3 gimbal.
Charging 5D2 camera:
Powering on:
1. Start up the RAGE3 by holding the mode button to enter
standby mode.
2. Connect the power input end of the connector to the DC
8.0V power outlet, then connect the other end to the
camera.
3. Install the camera to the stabilizer and adjust gimbal
balance.
4. Power on the camera and long press mode button to
activate the stabilizer.
Powering off:
Power off the camera first, then unplug the
connector from the stabilizer.
How To Use The RAGE3 Inverted
Normal Position
Inverted Position
DC 8.0 V Power Outlet Usage