Flashing blue
indicates the device is in recording mode.
You will normally see both
solid red
and
flashing blue
, this mean the device
is in recording mode and the device is charging the temporary battery.
Quick tips on the setting:
Resolution: This options allows you to select the resolution for the recording video
Loop recording: This option allows you to choose the time length for each of the recording
video.
Time Lapse: This option allow the device to record in a low FPS to create the time lapse
affect.
WDR: This is manufacture technology enable the camera to have better recording quality in
day and night, please enable this option.
Motion Detection: This option allows the device to only record a video if there is a movement
detected.
Power off delay: please set this option to off.
Power on delay: This option allows device to wait for certain time to switch on the device
after user press the power button to turn on the device.
Record Audio: You can enable/disable the audio recording for the video.
Date Stamp: You can enable/disable the device to display the date stamp on the video.
GSENSOR SET: This option allows you to set the sensitive level of the GSENSOR.
Date/Time: set the date/time
Plate number On Movie: You can set a number plate to be display on the video,
current version only support 8 digits
Time Zone Setting: This option allow you to set the time zone setting.
Auto Power Off: You can set the auto power off time when the device is idle (not recording)
Beep sound: You can enable/disable the beep sound.
Language: This option allows you to select the available menu language
TV Mode: This option allows you to change the TV output mode "NTSC/PAL"
Frequency: This option allows you to change the display freq
uency “50Hz/60Hz"
Exposure: This option allows you to set the exposure
White Balance: This option allows you to select the white balance.
Format: This option allows you to format the TF card
Default Setting: This option allows you to go back to default setting
Image Rotation: This option allow you to rotate the recording image.
Version: This option shows the current firmware version