6
----------------- EDID Copy
EDID Copy
for Transmitter Unit only
In some cases users may suffer from display problems due to
incorrect EDID communication between the display monitor and the
PC graphics card or insufficient EDID data programmed by display
manufactures. The
Local Unit
provide “EDID Copy” feature that
allows the Unit to read the necessary EDID information from the
attached video display and then provide it at all times to attached
computer. If no new EDID information is available from a display, a
default profile in the
Local Unit
(
Transmitter
) is automatically
provided instead.
To efficiently achieve EDID communication when the computer is
booting up, users are required to implement the EDID Copy on the
Local
Unit
(
Transmitter
)
before the operations begin as described
below:
z
Use (Load) default setting :
When using a monitor (without EDID compliant) for display. The
Unit will automatically select viable EDID data from the Unit’s
default EDID profile to set the EDID information up. Users can
achieve this EDID Copy by following the instructions below:
Step 1.
Press and Hold the button “EDID Copy” on the unit and
release the button RIGHT AFTER the LED flashing red.
(6~7 sec)
Step 2.
The power LED lighting steady GREEN indicating that
the EDID Copy is completed.
