6
EVM Solutions (Pty) Ltd 210 Main Street, Somerset West, Western Cape, South Africa, 7130
Support : 07 28 42 42 82
www.evx.co.za
Document Number: 200-2022-305-3
To
charge
a
battery
The EVx e-Scooter’s comes with a high-capacity Lithium Ion rechargeable battery. The battery
needs to be fully charged before your first use. The intelligent charger will control the battery pack
charging and will automatically end charging when the battery is fully charged. Make sure your
battery is fully charged before you go on a long trip.
The battery can be charged on your e-Scooter or you can remove it from the e-Scooter to charge it
at a convenient location inside your house or at a charging station.
Be sure to always use
only
the
charger
supplied with the product. (Using another charger may
void your battery warranty)
The charger must be plugged into a 220/230 50 Hz AC supply. (The ordinary power outlet available
in a South African home)
Charging
the
battery
whilst
installed
in
your
e
‐
Scooter
Figure
1
:
Location
of
onboard
Charge
Point
Preparation
for
onboard
charging:
Make Sure the e-Scooter is turned off.
Stand on the left side and locate the charge port cover on the bottom of the battery
pack.
Lift the rubber dust cap away to expose the DC charge connection port.
Carefully, plug the charger into the charger port as described below.
3.PREPERATION FOR FIRST USE
