Evinrude E25DELSES Скачать руководство пользователя страница 63 | Manualshive

Страница: 63 / 80

Evinrude E25DELSES Скачать руководство пользователя страница 63

60

Product Information

BATTERY - ELECTRIC START
MODELS

Requirements

• 12-volt, heavy-duty, designated for "marine"

use;

• Vented/refillable or maintenance-free; and
• Rated according to the minimum require-

ments in

Specifications

Deep-cycle batteries are suitable

IF

they

meet or exceed the minimum CCA require-
ments.
Ask your Dealer about your outboard’s re-
quirements before installing longer battery ca-
bles or a battery switch.

Installation

Read and understand the safety information
supplied with your battery BEFORE you begin
installation.

IMPORTANT:

Make sure all components are

clean and free of corrosion.
Connect the RED (+) cable to the positive (+)
battery post first. Connect the BLACK (–) ca-
ble to the negative (–) battery post last.
If you have marine battery posts, install each
main cable on the clamp adapter with a star-
washer below it. Install all wires from acces-
sories on the threaded portion of the post.

1. Main cable
2. Starwasher
3. Accessory wires

If you have automotive battery posts, place a
starwasher on the clamp adapter first, then
the main cable, and then the wires from the
accessories.

1. Main cable
2. Starwasher
3. Accessory wires

Tighten all connections securely and coat the
installation with

Triple-Guard

grease.

WARNING

Keep the battery connections clean,
tight, and insulated to prevent their
shorting or arcing and causing an
explosion. If the battery mounting sys-
tem does not cover the connections,
install covers. Check often to see that
connections stay clean and tight.

«
...
61
62
63
64
65
...
»

Содержание E25DELSES

















































































Отзывы:

Нет отзывов