Evinci infinity MD Series, Руководство пользователя, Страница: 14 / 20

While you change gears a sensor will reduce the motor power to avoid as much
as possible too high forces and nasty noises. You can help with this process by
reducing your pedal power with each gear change. Your chain and cassette will
thank you with a higher life expectancy.
The assistance level chosen on the display will assist you up to a certain speed
and adds motor power according to how much you push into the pedals.
Choose the assistance level and gear according to your needs and riding style.
Watch your crank revelations, if you have the feeling you have to push too hard
at too low revelations, change to a lower gear. If you pedal very fast with less
effort, choose a higher gear or reduce the assistance level.
When you intend to stop it is good practice to change the
gear back to a low gear so you may start without any
problems. This can easily be done while braking and slowly
pedalling as the motor will not push you further.
Brakes
We recommend always using both brakes at the same time – this allows the
rider to take the best control over the braking process without stressing the
front or rear brake. To brake efficiently, your front brake is there to stop you
and the back brake is there to shave off speed. Roughly 70-80% of your
stopping power comes from the front brake. Leaving 20-30% for the back
brake.
Please note that this bicycle uses high performance hydraulic
brakes with no special motor cut-out. When going around
narrow corners watch your power settings
Maintenance
Your
infinity
e-bike needs regular maintenance as any other normal pushbike.
All bike shops can help you with these maintenance steps.
There is no maintenance necessary of the electrical
components.
Brakes
This bike uses hydraulic brakes which are self-
adjusting. If you feel that the brake force gets
lower or the way you have to press the brake
levers exceed 50% of X (Fig 1) most likely the
brake pads have to be replaced. Please see your
local bike shop.
14
Fig 1