Evinci infinity HD Series, Руководство пользователя

Страница: 11 / 20

Adjust the stem and handlebar
The angle of the stem can be adjusted by opening the
6mm Allen Key screw at the right side of the stem. Do
not remove the screw! There are
two clamp plates, as soon as both
are release you may adjust the
angle. Re-tighten properly!
Adjust the tilt of the handlebar by opening two of the
handlebar clamp screws (upper or lower, 5mm Allen Key).
Check tire pressure
It is very important to maintain the correct tire pressure. Too low pressure will
decrease the range and can lead to rim or tire damages when riding over
kerbs. The recommended tire pressure is 40 psi. For muddy undergrounds, the
tire pressure can be reduced to improve traction.
Suspension fork
Your infinity mountain bike is equipped with a high-
performance air suspension. This fork allows the rider to
adjust the suspension to their riding style and terrain.
The pressure of the air-cartridge can be adjusted on the left
side by adding or releasing air pressure. A special pump is
required for this purpose – your local dealer can help you
with this. The pressure should be set according to the weight
of the rider.
Lock Out Lever
The right side lever allows to lock the oil cartridge. If
the lever is turned clockwise any fork movement will
be prevented. When going uphill it is usually better to
lock your fork to prevent fork pumping.
Rebound Control
A rebound control knob can be found at the bottom of
the right fork leg. For slow and bumpy rides adjust to
(+) for fast rides that need good brake control choose
a faster rebound setting (-).
11