E2615-CO
Rev 24.08.2022
Operation
Turn on the power. The instrument warm-up time takes about 1 minute after switching on
and the final sensor stabilization time to maximum accuracy takes about 30 minutes.
Make sure that the transmitter is properly mounted and the external devices connected.
Place the lid back and fix it with the screws. The device is ready to use.
Maintenance
Do not perform any maintenance operation with the power on.
Clean the device with a soft damp cloth. Do not use any abrasive cleaning agents. Do not
immerse the device in water or any cleaning media.
Calibration
E2615-CO transmitters have been calibrated by the Manufacturer with standard gas
mixtures before delivery. Please contact your dealer for more information.
9
